The process of solute being surrounded by a solvent is called solvation, and the solvation value refers to the number of solvent molecules surrounding an ion. Generally speaking, the degree of solvation increases with the increase of charge number and the decrease of ion radius.
The reactivity of a species increases as the degree of solvation decreases, as the solvated molecules shield the reactants and disperse the charge.
One part of a molecule may be more easily solvated by another solvent. For example:
Dipolar non proton solvents, such as DMSO, solvate cations, making it easier for another portion of anions to react.
Crown ethers, commonly used as phase transfer catalysts (PTC), also form complexes with cations to enhance the activity of anionic sites.
In a solvent mixture, two solvents can solvate different parts of molecules, resulting in better solubility of the mixed solvent than any single solvent.
There is a clear example of how the decrease in solvation degree of sodium hydroxide affects its reactivity: the alkalinity of solid sodium hydroxide (trihydrate) is 50000 times higher than that of 15% sodium hydroxide (11hydrate). PTC is said to produce "exposed anions," but a small amount of water is necessary, especially for solid-liquid phase transfer reactions. Therefore. The moisture content is a key parameter in the development of phase transfer catalysis. )Solvation is one of the many important factors to consider when choosing a solvent.
The categories of solvents can also be divided into the following categories:
a. Protonic solvents or hydrogen bond donor solvents (Lewis acids), such as water, ethanol, acetic acid, and ammonia;
b. Hydrogen bond acceptor solvents (Lewis bases), such as water, triethylamine, ethyl acetate, acetone, and DMF;
c. Polar non proton solvents, also known as "non hydroxyl solvents", such as DMSO, DMF, and dimethylacetamide DMAc;
d. Chlorinated alkane solvents, such as dichloromethane, chloroform, and carbon tetrachloride;
e. Fluorocarbon solvents, such as hexafluoroisopropanol;
f. Hydrocarbon solvents such as hexane, isooctane, and toluene;
g. Ionic liquids;
h. Supercritical gases, such as supercritical carbon dioxide.
The best solvent should be able to directly crystallize and precipitate the product from the reaction. Although this can be difficult to achieve at times, it is important to consider the following guiding points:
a. Provide safe and harmless large-scale production conditions for equipment and operators;
b. The physicochemical properties of solvents, such as polarity, boiling point, and water miscibility, affect the reaction rate, phase separation, crystallization effect, and the removal of volatile components through azeotropic or dry solids;
c. Other physical and chemical properties, such as the viscosity of the mixture, affect mass and heat transfer, the formation of by-products, and physical transport;
d. The difficulty of recycling and reusing solvents greatly affects the cost of the product (CoG).
The key principle for selecting solvents for rapid process scaling up is that homogeneous reactions are usually much faster and easier to scale up than heterogeneous reactions. If heterogeneous conditions are necessary, the solvent and reaction conditions must be selected to make the reaction mixture liquid and easy to mix. For traditional hydrogenation reactions, effective stirring is crucial due to the liquid-solid gas dispersion system. In many cases, product separation can drive the reaction to continue. It is best to crystallize instead of forming precipitates or oily substances, as this will involve the raw materials.
For some reaction processes, heterogeneous conditions are advantageous. Heterogeneous conditions can accelerate reactions or reduce the degradation of products under reaction conditions.
<Reprinted from https://mp.weixin.qq.com/s/CyT_zyE3E7WXc86Bg4VRbg>







